SK Motion
0ITEM(S) IN YOUR BAG / TOTAL:$0 view cart
Most Popular
On Sale
Batteries
Bodies
Car and Truck Parts
Cars and Trucks
Electronics
Gifts
Hardware
Hop Up Parts
Lap Counting System
Tire Foams
Tires
Tools
Wheels
Wheel Parts
$0 - $24.99
$25 - $49.99
Over $50
STRC ALUMINUM STEERING PLATE SET FOR HPI VENTURE (ORANGE) STRC ALUMINUM STEERING PLATE SET FOR HPI VENTURE (ORANGE)
$8.99
STRC ALUMINUM STEERING PLATE SET FOR HPI VENTURE (GUN METAL)
$8.99
STRC ALUMINUM UPPER PANHARD MOUNT FOR HPI VENTURE (BLACK)
$8.99
STRC ALUMINUM REAR LOCK-OUTS FOR HPI VENTURE (SILVER)
$24.99
STRC ALUMINUM DIFF COVER FOR HPI VENTURE (ORANGE)
$22.99
STRC ALUMINUM DIFF COVER FOR HPI VENTURE (GUN METAL)
$22.99
Home>Hop Up Parts>Axial SCX10 II
VANQUISH PORTAL F9 SCX10 II REAR AXLE SET (CLEAR)
Part NumberVPS08361
VANQUISH PORTAL F9 SCX10 II REAR AXLE SET (CLEAR)
Price
Your Price:
$199.99
Availability:
In Stock
MAP: $199.99
Quantity
Description

The F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1/2"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive*). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. 

These axles come with all parts needed to assemble a full front axle. 

Features

  • Portal box integrated into the rear housing for the most clearance at the axle ends possible and a more scale appearance
  • Gear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio* of 1.4:1 (20/28)
  • Included Vanquish AR44 machined gear set
  • Overall axle reduction of 6.26:1 with stock portal ratio
  • 13mm increase in ground clearance
  • Hex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hex
  • Chromoly inner rear axle shafts are triple bearing supported
  • Chromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strength
  • Chromoly spool
  • Aluminum 12mm hex with set screw
  • Uses all SCX10-II linkage
  • Complete Fast Eddy Bearings kit
  • Licensed by Currie Enterprises
  • Comes with One Piece Bearing Retainers (Patent Pending)
  • Double shear shock mounts
  • Upper link mounts built into third member
  • Increased upper link clearance for more suspension up travel ability

Requires the use of a 375 SLW hub or greater on Vanquish 1.9 wheels, Incision wheels will require a #4 or greater. Other wheel manufacturers offsets will vary. Axles must be used in pairs, you cannot run a front portal axle without a rear and vice versa.

*Overdrive gear sets are recommended for use in the front axle only

Related Items
STRC ALUMINUM DIFF COVER FOR SCX10 II (SILVER)
STA31384DS STRC ALUMINUM DIFF COVER FOR SCX10 II (SILVER)
Your Price:$22.99
Availability: In Stock
STRC ALUM. HD MOTOR MOUNT FOR SCX10 II (S)
STA31377S STRC ALUM. HD MOTOR MOUNT FOR SCX10 II (S)
Your Price:$29.99
Availability: In Stock
STRC ALUM. SERVO MOUNT BRACKETS FOR SCX10 II (BK)
STA31387BK STRC ALUM. SERVO MOUNT BRACKETS FOR SCX10 II (BK)
Your Price:$19.99
Availability: In Stock
STRC ALUM. SERVO MOUNT BRACKETS FOR SCX10 II (GM)
STA31387GM STRC ALUM. SERVO MOUNT BRACKETS FOR SCX10 II (GM)
Your Price:$19.99
Availability: In Stock
VANQUISH ATLAS SCX10 II TRANSFER CASE - BLACK
VPS08103 VANQUISH ATLAS SCX10 II TRANSFER CASE - BLACK
Your Price:$29.99
Availability: Back Order
VANQUISH CURRIE ROCKJOCK SCX10 II DIFF COVER (RED)
VPS06655 VANQUISH CURRIE ROCKJOCK SCX10 II DIFF COVER (RED)
Your Price:$13.99
Availability: In Stock
  
Browse Similar Items
Color>Black
Part Type>Transmission and Drivetrain
Brand>Vanquish Products