PRODUCT DETAILSSpecifically designed to work with Vanquish Products Wheels and VP 8 Degree knuckles.
Made from Solid 1 5/8 brass rod.
Outer diameter is 1.600 Inches
Precision cnc machined.
Weighs in at 3.5 OZ or 99 grams.
Easy to install, front mount with 3 screws.
Allows full 50 degree steering in both directions and clearance for steering link.
Precision fit with Vanquish Products 8 degree knuckle. leaves no room to move under impact.
Installation does not cause bearing distortion.
Knuckle weights fit all Vanquish Products 2.2 Wheels.
depending on hub you may be limited on the number of ring you can run,
See below for a complete list.
Use some Brasso brass polish for long lasting shine.
Use low strength locktite to ensure mounting screw do not come
loose over time, do not over tighten screws, they only need to be snug.
SLW Wheel with 225 hubs can add 2ea. 1/8 rings= 4.88oz.
SLW Wheel with 350 hubs can add 3ea. 1/8 rings= 5.57oz.
SLW Wheel with 475 hubs can add 4ea. 1/8 rings= 6.26oz.
SLW Wheel with 600 hubs can add 5ea. 1/8 rings= 6.95oz.
SLW Wheel with 725 hubs can add 6ea. 1/8 rings= 7.64oz.
SLW Wheel with 850 hubs can add 7ea. 1/8 rings= 8.33oz.
DH Procomp Wheel with 335 hubs can not add rings
DH Procomp Wheel with 460 hubs can add 1ea. 1/8 rings. = 4.19 oz.
DH Procomp Wheel with 585 hubs can add 2ea. 1/8 rings. = 4.88oz.
DH Procomp Wheel with 710 hubs can add 3ea. 1/8 rings. = 5.57oz.
DH Procomp Wheel with 835 hubs can add 4ea. 1/8 rings. = 6.26oz.
DH ProCOmp II with 335 Does not fit.
DH ProCOmp II with 460 Does not Fit.
DH ProCOmp II with 585 Does Fit. But no extra rings.
DH ProCOmp II with 710 hubs can add 1ea. 1/8 rings. = 4.19oz. 114g
DH ProCOmp II with 835 hubs can add 2ea. 1/8 rings. = 4.88oz. 134g